Fluid Bed Multi Technology FBMT By Chitra Machineries

intent by intent labs

Published Thu, Nov 23rd 2017, 13:51 | Business

2 bar sock resistance construction.
All contact parts made out of SS316.
All motor are of flameproof.
Inside of the all contact parts will be @ mirror finish and outside of all contact parts @ matt finish.
Rh trans-meter at AHU.
Inlet, outlet & product bed temperature sensors.
Differential pressure trans-meter for Filter bag & differential pressure gauge for Hepa filter at AHU.
A.C. Frequency drive for all motors.
Sampling port at product container.
Quick opening system for container sieve.
CIP port and nozzles.
Material charging ports , suitable for gravity and vacuum.
PLC based power panel with touch screen based operating panel for automated process controls.
Wash water drain port with valve at inlet plenum.
All rubber gaskets of silicon.
All light and sight glass with T/C clamp facility.
Pneumatic inflatable gaskets at bottom and top of the product container, top of the expansion chamber and for air discharge bag sealing.
CGMP construction.

Optional Feature Which will be provide at extra cost, If Required :

Dew Point Sensor at inlet air duct, instead of Rh sensor at AHU.
Velocity Trans-meter for CFM measurement.
Differential Trans-meter instead differential pressure gauge at AHU and
Differential Pressure Trans - Meter for container sieve.
Jacketed Vessel instead of non jacketed. (for Solution Preparation.).
Flameproof Motor & Flameproof enclosure for panel for Solution Preparation Vessel.
Wet Scrubber at exhaust air.
Steam & Chilled Water Controlling Valve.
Peristaltic Pump of Master Flex-USA make instead of Indian make.
Flow Meter at Solution Spray System. [ Emersion make ( USA ) – Coriolis Type.]
Flameproof/Weatherproof Enclosure for Touch Screen.
Additional Duct per 1 Meter – Non insulated / Insulated.
Solid flow monitoring system.
Reduce capacity bowl for top spray & bottom spray.

Bio